Elenco aggiornato al 29-11-2006
[1] C.
Attaianese, A. Damiano, I. Marongiu, A. Perfetto, G.Tomasso.
"An Algorithm for Speed and Parameter Estimation in mP Speed
Controlled Induction Motor Drives"; 27-th International
Symposium on Industrial Robots (ISIR’96), Milano (Italia),
06-08/10/1996, pp.477-482, vol. 2
[2] C.
Attaianese, A. Damiano, I. Marongiu, A. Perfetto, G. Tomasso.
"A Novel Approach to Speed and Parameters Estimation in
Induction Motor Drives"; IEEE-IEMDC’97: International
Electric Machines and Drives Conference (IEMDC ’97), Milwaukee,
Wisconsin (USA), 18-21/05/1997, pp.MC2-5.1/MC2-5.3, vol. 1
[3] C.
Attaianese, A. Damiano, I. Marongiu, A. Perfetto, G. Tomasso.
"Direct Torque and Flux Control of Induction Motor Drives";
PEDS’97: Power Electronics and Drive Systems (PED’S ’97),
Singapore, 26-29/05/1997, pp.642-648, vol. 2
[4] C.
Attaianese, A. Damiano, I. Marongiu, A. Perfetto, G. Tomasso.
"On Line Estimation of Speed and Parameters in Induction
Motor Drives"; International Symposium on Industrial
Electronics (ISIE’97), Guimaraes (Portugal), 7-11/07/1997,
pp.1054-1059, vol. 3
[5] C.
Attaianese, A. Perfetto, R. Rizzo, G.Tomasso. "A
Control Strategy Imposing the Re-adhesion Trajectory for
Electrical Traction Drives"; Universities Power Engineering
Conference (UPEC ’97), Manchester (United Kingdom),
09-11/09/1997, pp.581-584, vol. 2
[6] C.
Attaianese, I: Marongiu, A. Perfetto, G. Tomasso. "DC
Drives Performances Improvement by means of H_infinity
Controllers"; 5th International Workshop on Advanced Motion
Control (AMC’98), Coimbra (Portugal), 29-30/06/1998, pp.282-287,
vol. 1
[7] C.
Attaianese, A. Damiano, I. Marongiu, A. Perfetto, G. Tomasso.
"Voltage Vectorial Control of an Induction Motor";
International Symposium on Industrial Electronics (ISIE’98),
Pretoria (South Africa), 07-10/07/1998, pp.283-288, vol. 1
[8] C.
Attaianese, I. Marongiu, A. Perfetto, G. Tomasso. "H_infinity
Speed Control of Induction Motor Drives"; 8th International
Power Electronics & Motion Control Conference (PEMC ’98), Prague
(Czech Republic), 08-10/09/1998, pp.148-153, vol. 4
[9] C.
Attaianese, F. Parillo, A. Perfetto, G. Tomasso. "Experimental
Implementation of an H_infinity Controller for Position Control
of DC Drives"; International Conference on Automatic Control
(PADI2’98), Piura (Perù), 01-03/10/1998, pp.27-32, vol. 1
[10] C.
Attaianese, V. Nardi, A. Perfetto, G. Tomasso. "Vectorial
Torque Control(VTC): a Novel Approach to Torque and Flux Control
in Induction Motor Drives"; Applied Power Electronics
Conference (APEC’99), Dallas (Texas) USA, 14-18/03/1999, pp.
257-263, vol. 1
[11] G.
Tomasso. "Controllo Vettoriale di Coppia e Flusso per
Motori Asincroni"; (Tesi di Dottorato di Ricerca),
09/04/1999, pp. 1-101.
[12] C. Attaianese, F.
Parillo, A. Perfetto, G. Tomasso. "A SVM Algorithm for
Torque Control of Inverter Fed Induction Motor Drives";
International Electric Machines and Drives Conference
(IEMDC’99), Seattle, Washington (USA), 10-12/05/1999,
pp.454-456, vol. 1
[13] C. Attaianese, A.
Perfetto, G. Tomasso. "Robust Position Control of DC
Drives by means of H_infinity Controllers"; IEE Proceedings
- Electric Power Application (IEE Proceedings), 01-02/07/1999,
pp.391-396, vol. 146, No.4, July 1999
[14] C.
Attaianese, A. Perfetto, G. Tomasso. "Field Oriented
Control of Induction Motor by Means of a H_infinity Controller";
International Symposium on Industrial Electronics 1999
(ISIE’99), Bled (SLOVENIA), 12-16/07/1999, pp.1238-1243, vol. 3
[15] C.
Attaianese, A. Perfetto, G. Tomasso. "Position Control
of Induction Motor by means of Vectorial Torque Control (VTC)
Strategy"; 8th European Conference on Power Electronics and
Application (EPE’99), Lausanne (Switzerland), 07-09/09/1999,
pp., vol.
[16] C.
Attaianese, A. Perfetto, G. Tomasso. "Dead Time
Compensation in VSI Feeding Induction Motor with Space Vector
Modulation"; ELECTRIMACS’99 (ELECTRIMACS’99), Lisbona
(PORTUGAL), 14-16/09/1999, pp.181-186, vol. 1
[17] C.
Attaianese, A. Perfetto, G. Tomasso. "Adhesion-Recovery
Control for Electrical Traction Drives"; 34th University
Power Engineering Conference (UPEC’99), Leicester (UK),
14-16/09/1999, pp.596-599, vol. 2
[18] C.
Attaianese, V. Nardi, A. Perfetto, G. Tomasso. "Vectorial
Torque Control: A Novel Approach to Torque and Flux Control of
Induction Motor Drives"; IEEE Transactions on Energy
Conversion (IEEE Transaction), 01-01/11/1999, pp.1399-1405, vol.
35, no 6
[19] C.
Attaianese, A. Damiano, I. Marongiu, A. Perfetto, G. Tomasso.
"A Novel Approach to Speed and Parameters Estimation in
Induction Motor Drives"; IEEE Transactions on Energy
Conversion (IEEE Transaction), , 01-01/12/1999, pp.939-945, vol.
14, no 4
[20] C.
Attaianese, G. Tomasso. "H_infinity Controller Design
and Implementation for Induction Motors"; IPEC 2000:
International Power Electronics Conference (IPEC 2000), Tokyo
(JAPAN), 03-07/04/2000, pp.1134-1139, vol. 3
[21] C.
Attaianese, V. Nardi, G. Tomasso. "A
Self-Commissioning Algorithm for VSI-Fed Induction Motors";
7th Workshop on Computers in Power Electronics (COMPEL 2000),
Blacksburg, Virginia, 16-18/07/2000, pp.211-216, vol. 1
[22] C.
Attaianese, D. Capraro, G. Tomasso. "A Space Vector
Modulator with Variable Clock Frequency"; 35th University
Power Engineering Conference (UPEC 2000), Belfast (United
Kingdom), 06-08/09/2000, pp., vol.
[23] C.
Attaianese, G. Tomasso. "Predictive Compensation of
Dead Time Effects in VSI feeding Induction Motors"; 2000 IAS
ANNUAL MEETING (IAS 2000), Rome (ITALY), 08-12/10/2000,
pp.2331-2337, vol. 4
[24] C.
Attaianese, V. Nardi, F. Parillo, G. Tomasso. "A Quick
and Easly Implementable Algorithm for Self-Commissioning of
Induction Motor Fed by VSI"; International Symposium on
Industrial Electronics 2000 (ISIE 2000), Puebla (MEXICO),
4-8/12/2000, pp.236-240, vol. 1
[25] C. Attaianese, G.
Tomasso. "A Variable Frequency Space Vector Modulator for
VSI Fed Induction Motor Drives"; International Symposium on
Industrial Electronics 2000 (ISIE 2000), Puebla (MEXICO),
4-8/12/2000, pp.241-246, vol. 1
[26] C. Attaianese, G.
Tomasso. "H_infinity Control of Induction Motor Drives";
IEE Proceedings- Electric Power Application (IEE Proceedings),
01-01/05/2001, pp.272-278, vol.148 Issue 3
[27] C.
Attaianese, G. Tomasso. "Predictive compensation of
dead-time effects in VSI feeding induction motors"; IEEE
TRANSACTIONS ON INDUSTRY APPLICATIONS (IEEE Transaction),
01-01/05/2001, pp.856-863, vol. 37, Issue 3
[28] C.
Attaianese, G. Tomasso. "H_infinity Controller Design
and Implementation for Induction Motors"; IEE-J TRANSACTION
INDUSTRY APPLICATION SOCIETY (IEE-J Transaction), 01-01/06/2001,
pp.635-642, vol. 121
[29] C.
Attaianese, D. Capraro, G. Tomasso. "Hardware Dead
Time Compensation for VSI Based Electrical Drives";
International Symposium on Industrial Electronics 2001 (ISIE
2001), Pusan (Korea), 12-16/06/2001, pp.759-764, vol. 2
[30] C.
Attaianese, D. Capraro, G. Tomasso. "A Low Cost
Digital SVM Modulator with Dead Time Compensation"; Power
Electronics Specialists Conference (PESC2001), Vancouver
(CANADA), 17-21/06/2001, pp., vol.
[31] C.
Attaianese, D. De Bonis, G. Tomasso. "A Low Cost
Resolver-to-Digital Converter"; International Electric
Machine and Drives Conference (IEMDC 2001), Boston - MA - (USA),
18-21/06/2001, pp.917-921, vol. 1
[32] C.
Attaianese, V. Nardi, G. Tomasso. "Modelling and
Controlling PWM Rectifiers"; University Power Engineering
Conference (UPEC2001), Swansea (UK), 12-14/09/2001, pp., vol.
[33] C.
Attaianese, V. Nardi, G. Tomasso. "Virtual Testing of
Motion Systems for Industrial Automation"; University Power
Engineering Conference (UPEC2001), Swansea (UK), 12-14/09/2001,
pp., vol.
[34] C.
Attaianese, V. Nardi, G. Tomasso. "Intelligent AC/DC
Conversion by Means of Active Rectifier"; International
Conference on Intelligent Engineering Systems (INES2001),
Helsinki (FINLAND), 16-18/09/2001, pp.507-512, vol. 1
[35] C.
Attaianese, V. Nardi, G. Tomasso. "Self-Commissioning
of Induction Motors Fed by VSI"; Taylor & Francis Electric
Power Components and Systems Journal, 01-01/01/2002, pp.1-9,
vol. 30
[36] C.
Attaianese, G. Tomasso. "Optimized Modulation for PWM
Rectifiers"; IEEE Power Engineering Society Winter Meeting
2002 (PES WM2002), New York (USA), 27-31/01/2002, pp.1264-1269,
vol.2
[37] C.
Attaianese, G. Tomasso. "Low Losses Modulation of
PWM-Rectifier"; Applied Power Electronics Conference (APEC
2002), Dallas (USA), 10-14/03/2002, pp.497-502, vol. 1
[38] C.
Attaianese, G. Tomasso. "Tecniche di Modulazione per
Raddrizzatori Attivi"; ANAE - 13° Seminario Interattivo su
Azionamenti Elettrici (BRIXEN 2002), Bressanone (BZ),
18-20/03/2002, pp.13-31, vol. 2
[39] C.
Attaianese, V. Nardi, G. Tomasso. "A Novel Approach to
Modelling and Control of Active Front-end Inverter Feeding
Induction Motor"; Power Conversion Conference (PCC 2002),
Osaka (JAPAN), 02-05/04/2002, pp.1322-1327, vol. 3
[40] C.
Attaianese, G. Tomasso. "PWM Rectifier Analytical
Model"; Conferenza della Società Italiana di Matematica
Applicata e Industriale (SIMAI 2002), Chia Laguna (ITALY),
27-31/05/2002, pp., vol.
[41] C.
Attaianese, A. Perfetto, G. Tomasso. "A Space Vector
Modulation Algorithm for Torque Control of Inverter Fed
Induction Motor Drive"; IEEE Transactions on Energy
Conversion (IEEE Transaction), , 01-01/06/2002, pp.222-228, vol.
17 No. 2
[42] C.
Attaianese, D. Capraro, G. Tomasso. "High Efficiency
SVM Technique for VSI"; 7th International Workshop on
Advanced Motion Control (AMC2002), Maribor (SLOVENIA),
03-05/07/2002, pp.269-274, vol. 1
[43] C.
Attaianese, V. Nardi, G. Tomasso. "Vectorial Torque
Control of Permanent Magnet AC (PMAC) Machine Drives in the
Field Weakenong Region"; 7th International Workshop on
Advanced Motion Control (AMC2002), Maribor (SLOVENIA),
03-05/07/2002, pp. 257-261, vol.1
[44] C.
Attaianese, A. Ometto, N. Rotondale, G. Tomasso. "Optimal
Modulation Strategy for Active front-end Inverter Feeding
Induction Motors"; International Symposium on Industrial
Electronics 2002 (ISIE2002), L’Aquila (ITALY), 08-11/07/2002,
pp. 1253-1258, vol.4
[45] C.
Attaianese, G. Betta, D. Capriglione, G. Tomasso. "PWM
Techniques for Voltage Source Inverter: a Comparative Analysis
in Terms of EMC Performances";International Symposium on
Industrial Electronics 2002 (ISIE2002), L’Aquila (ITALY),
08-11/07/2002, pp. 795-800, vol. 3
[46] C.
Attaianese, V. Nardi, G. Tomasso. "Improved Dynamic
Control for Permanent Magnet AC (PMAC) Machine in the Field
Weakening Region"; International Conference on Electrical
Machine (ICEM2002), Brugge (BELGIUM), 25-28 /08/2002.
[47] C.
Attaianese, V. Nardi, F. Parillo, G. Tomasso, "An
Hardware/Software Tool for Automatic Induction Motor Parameters
Identification"; Universities Power Engineering Conference
(UPEC2002), Stafford (UK), 9-11 /9/2002, pp.511-515, vol. 2
[48] C.
Attaianese, V. Nardi, F. Parillo, G. Tomasso. "Implementation
of a Wide Range Speed Control for PMAC Machine Drive";
Universities Power Engineering Conference (UPEC2002), Stafford
(UK), 9-11 /09/2002, pp.609-613, vol. 2.
[49] C.
Attaianese, V. Nardi, G. Tomasso. "A
self-commissioning algorithm for VSI-fed induction motors";
IEEE TRANSACTIONS ON POWER ELEECTRONICS (IEEE Transaction), ,
01-01 /11/2002, pp.1017- 1023, vol. 17.
[50] C.
Attaianese, G. Tomasso. "Optimal Low Switching
Frequency Modulation of a Front-End Inverter Feeding Induction
Motors"; Applied Power Electronics Conference and Exposition
(APEC 2003), Miami (USA), 9-13 /2/2003, pp.833-838, vol. 2.
[51] C.
Attaianese, G. Tomasso."A Signal Conditioning Board
for Eliminating the Dead Time Effect in Standard Industrial
Inverters"; PCIM-Power Electronics Intelligent Motion Power
Quality (PCIM 2003), Nuremberg (GERMANY), 20-22 /5/2003.
[52] C. Attaianese, G. Tomasso. "A Stand Alone Board for
Resolver to Digital Conversion for Industry Application";
PCIM-Power Electronics Intelligent Motion Power Quality (PCIM
2003), Nuremberg (GERMANY), 20-22 /5/2003.
[53] C.
Attaianese, G. Tomasso. "A New Quasi-resonant DC Link
Topology for Soft Switching of Voltage-Source Inverter";
34th Power Electronics Specialists Conference (PESC2003),
Acapulco (MEXICO), 15-19 /06/2003, pp.525-530, vol. 1
[54] G. Betta, D.
Capriglione, G. Tomasso, "Evaluation of measurement
uncertainties in conducted emissions by adjustable speed
electrical power drives systems"; 20th IEEE Instrumentation
and Measurement Technology Conference (IMTC2003), Colorado
(USA), 20-22 /06/2003, pp.1233-1238, vol. 2
[55] C. Attaianese, G. Tomasso
"A Quasi Resonant Voltage Source Inverter for Induction Motor
Drives"; 10th European Conference on Power Electronics and
Applications (EPE2003), Toulouse (FRANCE), 2-4 /9/2003.
[56]
C. Attaianese, V. Nardi, G. Tomasso
"Wide
Speed Operation Exploitation of Sinusoidal Permanent Magnet
Motors"; 29th Annual Conference of the IEEE Industrial
Electronics Society (IECON2003), Ranaoke (USA), 2-6 /11/2003,
pp.1244-1248, vol. 1
[57]
C. Attaianese, V. Nardi, G. Tomasso
"A
novel digital modulator for voltage source inverter with
adaptive switching frequency selection"; Applied Power
Electronics Conference and Exposition (APEC2004), Anaheim,
California (USA), 22-26 /02/2004, pp.1669-1674, vol. 3
[58]
C. Attaianese, V. Nardi, G. Tomasso "High performances
supercapacitor recovery system for industrial drive applications";
Applied Power Electronics Conference and Exposition (APEC2004),
Anaheim, California (USA), 22-26 /02/2004, pp.1635-1641, vol. 3
[59]
C. Attaianese, V. Nardi, G. Tomasso "Virtual Testing
of High Speed Elevators Using Supercapacitor
Recovery
System"; ANAE-15° Seminario Interattivo su Azionamenti
Elettrici (BRIXEN2004), Brixen (ITALY), 22-24 /03/2004
[60]
C. Attaianese, D. Capraro, V. Nardi, G. Tomasso
"A
Digital Mmodulator for Increasing the Performances of
Voltage Source Inverter Based Drives"; PCIM-Power
Electronics Intelligent Motion Power Quality PCIM2004),
Nuremberg (GERMANY), 25-27 /05/2004
[61]
C. Attaianese, V. Nardi, F. Parillo, G. Tomasso
"Application
of the supercapacitors in high performances drive system";
PCIM-Power Electronics Intelligent Motion Power Quality
(PCIM2004), Nuremberg (GERMANY), 25-27 /05/2004
[62]
C. Attaianese, V. Nardi, G. Tomasso
"Electromagnetic
Self Compatibility of Power Converters"; 35th Power
Electronics Specialists Conference (PESC2004), Aachen (GERMANY),
22-24 /06/2004, pp.3209-3214, vol. 1
[63]
G. Betta, D.
Capriglione, G. Tomasso.
"Evaluation of
the Measurement Uncertainties in the Conducted Emissions From
Adjustable Speed Electrical Power Drive Systems"; IEEE
TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (IEEE
TRANSACTIONS), IEEE, 4-4 /8/2004, pp.963 - 968, vol. 53 , Issue:
4
[64] G. Betta, D.
Capriglione, M. Laracca, G. Tomasso, ."Reproducibility
and uncertainty of conducted emission measurements for
adjustable speed electrical power drive characterization";
21st IEEE Instrumentation and Measurement Technology Conference,
2004 (IMTC04), Como (ITALY), 18-20 /05/2004, pp.2120 - 2125,
vol. 3
[65] C.
Attaianese, D. Capraro, G. Tomasso, "EMI Analysis of
Power Converters for Layout Optimization"; 11th
International Power Electronics and Motion Control Conference
(EPE-PEMC2004), Riga (LATVIA), 2-5 /09/2004.
[66] C.
Attaianese, V. nardi, G. Tomasso, "Modelling and
Controlling of Surface Mounted PM motors Including Saturation
Effects"; 16th International Conference on Electrical
machines (ICEM04), Cracow (Poland), 5-8 /09/2004, vol. 1
[67] C.
Attaianese, V. Nardi, G. Tomasso, "Modelling of
permanent magnet AC machine by taking into account dynamic and
static inductances"; 37th IAS Annual Meeting (IAS04),
Seattle (USA), 3-7 /10/2004, pp.1709 - 1714, vol. 3
[68] C.
Attaianese, V. Nardi, G. Tomasso, "Virtual Testing of
High Speed Elevators Using Supercapacitor Recovery System";
International Conference on Industrial Technology (ICIT2004),
Hammamet (Tunisy), 8-10 /12/2004.
[69] C.
Attaianese, G. Tomasso, "Auto-tuning
Self-compatibility of Power Converters"; Applied Power
Electronics Conference and Exposition (APEC2005), Austin-Texas
(USA), 6-10 /03/2005, pp.1964-1969, vol. 3.
[70] C.
Attaianese, V. Nardi, G. Tomasso, "VSI Parallel
Operation for Active Filtering in High Power Drives";
ANAE-16° Seminario Interattivo su Azionamenti Elettrici
(BRIXEN'05), Brixen - ITALY, 7-9 /03/2005, pp.56-69, vol. 1
[71] C.
Attaianese, D. Capraro, V. Nardi, G. Tomasso, "Internal
Electromagnetic Compatibility of AC-Drives"; IPEC 2005:
International Power Electronics Conference (IPEC 2005), Niigata
(JAPAN), 04-08 /04/2005, pp.1091-1096, vol. 1
[72] C.
Attaianese, V. Nardi, G. Tomasso, "Multi Drives
Modulation Synchronization via Field-Bus"; International
Electric Machines and Drives Conference (IEMDC05), San Antonio
(USA), 15-18 /05/2005, pp.809-814, vol. 1
[73] C.
Attaianese, V. Nardi, G. Tomasso, "VSI Parallel
Operation for Active Filtering In High Power Drives";
International Electric Machines and Drives Conference (IEMDC05),
San Antonio (USA), 15-18 /05/2005, pp.1335-1340, vol. 1
[74] C.
Attaianese, V. Nardi, G. Tomasso, "THD and Power
Losses Optimization by Means of Variable Frequency Space Vector
Modulation"; 35th Power Electronics Specialists Conference
(PESC05), Recife (BRASIL), 12-16 /06/2005.
[75] C.
Attaianese, V. Nardi, G. Tomasso, "Improved Dynamic
Control for Permanent Magnet AC (PMAC) Machine in the Field
Weakening Region"; European Transaction on Electrical Power
(ETEP), , 1-30 /06/2005, pp.285-297, vol. Vol. 15, No. 3
[76] C.
Attaianese, V. Nardi, G. Tomasso, "A Novel SVM Strategy for VSI
Dead-Time-Effect Reduction"; IEEE TRANSACTIONS ON INDUSTRY
APPLICATIONS (IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS), , 01-
01 /11/2005, pp.1667-1674, vol. 41, No. 6
[77]
C. Attaianese, V. Nardi, G. Tomasso, "Motor side active filter
for high power synchronous drive"; Applied Power Electronics
Conference and Exposition (APEC2006), Dallas (USA), 21-23
/03/2006, pp.218-224, vol. 1
[78]
C. Attaianese, V. Nardi, G. Tomasso, "High performances control
of Front End Inverter feeding PM Machines"; PCIM-Power
Electronics Intelligent Motion Power Quality (PCIM2006),
Nuremberg (GERMANY), 29-30 /05/2006
[79]
C. Attaianese, D. Capraro, V. Nardi, G. Tomasso, "Modulation
technique for power converter operating in short time and
intermittent duty"; PCIM-Power Electronics Intelligent Motion
Power Quality (PCIM2006), Nuremberg (GERMANY), 29-30 /05/2006
[80] C. Attaianese, V. Nardi, G.
Tomasso, , ."Improving the internal electromagnetic
compatibility in AC drives"; WSEAS Transaction on Power Systems
(WSEAS Transaction), , 01-01 /06/2006, pp.1022-1027, vol. Issue
6, Vol. 1
[81]
C. Attaianese, D. Capraro, V. Nardi, G. Tomasso, ."Low Power
Losses Configuration for dc/ac Converters"; CIPS - International
Conference on Integrated Power Systems (CIPS2006), Naples
(ITALY), 07-08 /06/2006, pp.381-388, vol. 1
[82]
C. Attaianese, V. Nardi, G. Tomasso, , ."Active Filtering For
Exploiting Of High power synchronous drives"; IEEE International
Symposium on Industrial Electronics (ISIE2006), Montreal
(CANADA), 09-12 /06/2006, pp.2309-2314, vol. 1
[83] C. Attaianese, V. Nardi, G. Tomasso, , ."High Performance
Modulation System For Multi-Drives application"; IEEE
International Symposium on Industrial Electronics (ISIE2006),
Montreal (CANADA), 09-12 /06/2006, pp.2349-2354, vol. 1
[84] C. Attaianese, V. Nardi, G.
Tomasso, , ."Improving the Performances of Power Converters
working in no-continuous duty"; 32nd Annual Conference of the
IEEE Industrial Electronics Society (IECON2006), Paris (FRANCE),
07-11 /11/2006, pp.2688-2693, vol. 1
|